Archiving Emails from IceWarp Server

This implementation guide covers the specifics of archiving IceWarp Mail Server mailboxes. It is assumed that you already have a MailStore Server installation or test installation and are familiar with the fundamentals of MailStore Server. Please refer to the Manual or the Quick Start Guide for more information.

MailStore Server offers several ways to archive emails from IceWarp Mail Server mailboxes, which are described below. If you are not sure which archiving method best suits your company, please refer to the chapter Choosing the Right Archiving Strategy.

Synchronizing Users

MailStore Server offers special support for synchronizing users with an IceWarp Mail Server. Information about setup is available in chapter IceWarp Server Integration of the manual.

Archiving Individual Mailboxes

In MailStore Server IceWarp Mail Server archiving tasks are stored in archiving profiles. By following the procedure described here you can archive a single IceWarp Mail Server mailbox for a specific MailStore user. The archiving process can be executed manually or automatically. You can find further information about executing archiving profiles in chapter Email Archiving with MailStore Basics.

• Users can only archive their own mailboxes to their personal user archive. To archive the emails of other users, you have to be logged on to MailStore Client as MailStore administrator. Only MailStore administrators can archive the emails of other users.
• In MailStore, click on Archive Email.
• To create a new archiving profile, select IceWarp Mail Server from the Email Servers list in the Create Profile area of the application window.
• A wizard opens guiding you through the setup process.

  

• Select Single Mailbox and click on OK.
• Fill out the fields Email Address, Host, Access via, User Name and Password. The Email Address is used to label the folder that is created in the archive by this profile. Click on Test to verify the data entered.

  For the IMAP-TLS and IMAP-SSL protocols only: If the certificate provided by the remote host cannot be verified (e.g. self-signed or signed by an unknown certificate authority), enable the option Accept all certificates to allow MailStore to establish a connection. As this option leads to an insecure configuration, warnings may appear in the summary and/or the dashboard.

  

• Click on Next.
• Customize the list of folders to be archived, the filter and the deletion rules. By default, no emails will be deleted from a mailbox. The timeout value only has to be adjusted as needed (e.g. with very slow servers).

  

• Click on Next.
• If logged on to MailStore Server as administrator, the target archive can be specified at the next step. Select the archive of the user for whom the mailbox is to be archived.

  

• At the last step, a name for the new archiving profile can be specified. After clicking on Finish, the archiving profile will be listed under Saved Profiles and can be run immediately, if desired.

Archiving Multiple Mailboxes in One Step

Starting with version 10.4, IceWarp Mail Server allows users with the appropriate user privileges to access the mailboxes of other users via IMAP. Once a new user has been created or an existing user has been provided with the corresponding privileges, please proceed as follows:

• Log on to MailStore Client as MailStore administrator.
• Click on Archive Email.
• From the list E-Mail-Server under Create Profile select IceWarp Mail Server to create a new archiving profile.
• A wizard opens to help specify the archiving settings.

  

• Select Multiple Mailboxes.
• To be able to archive multiple mailboxes, MailStore users along with their email addresses have to be set up in the MailStore user management.

  

• Under Host enter the name of your IceWarp mail server.
• Under Access via select the protocol to be used to access the IceWarp mail server. Wherever possible, you should always choose IMAP-TLS or IMAP-SSL.

  Please note: If you would like to automate the archiving process and access the IceWarp mail server using IMAP-TLS or IMAP-SSL, you should enable the option Ignore SSL Warnings. Otherwise, if an unofficial or self-signed certificate is used on the IceWarp mail server, the automatic execution of the archiving process will fail.

• Under User Name and Password enter the access data of a user who has access to all IceWarp mailboxes to be archived. With IceWarp Mail this is a user with administrative privileges.
• Click on Next to continue.

  

• Customize the list of folders to be archived, the filter and the deletion rules as needed. By default, no emails will be deleted from the mailbox. The timeout value only has to be adjusted as needed (e.g. with very slow servers). Please keep in mind that these settings apply to all mailboxes to be archived.
• Click on Next to continue.

  

• Select the users whose mailboxes you would like to archive. The following options are available:

  All users with a configured email address

  Choose this option to archive the mailboxes of all users who are set up in the MailStore user management along with their email addresses.

  All users except the following

  Using the list below, this feature allows you to exclude individual users (and thereby their IceWarp mailboxes) from the archiving process.

  Only the following users

  Using the list below, this feature allows you to include individual users (and thereby their IceWarp mailboxes) in the archiving process. Only the mailboxes of users who were explicitly specified will be archived.

  Synchronize with directory services before archiving

  If this option is enabled, the MailStore user list is synchronized with the configured directory service before every archiving process. This has the advantage that new employees, for example, will be set up as MailStore users automatically before archiving allowing MailStore to archive their IceWarp mailboxes automatically as well. This feature is especially recommended for archiving mailboxes according to a schedule.

• Finally, you can choose a name for the new archiving profile. Once you click on Finish, the archiving profile will be listed under Saved Profiles and can be executed right away.

Additional information about executing archiving profiles is available in chapter Email Archiving with MailStore Basics.

Archiving All Incoming and Outgoing Emails Directly

IceWarp Mail Server allows you to deliver all emails to a separate IceWarp Mail Server archiving mailbox. From this IceWarp Mail Server archiving mailbox and using the respective archiving profile, the archiving process can be executed with MailStore Server. The emails are distributed among the archives of the corresponding MailStore users.

Step 1: Setup of the IceWarp Mail Server Archiving Feature

To create a central multidrop mailbox to which copies of all incoming and outgoing emails are delivered, IceWarp Mail Server's archiving feature must first be activated and configured. Please proceed as follows:

• Log on to IceWarp Server Administrator or IceWarp WebAdmim as administrator.
• Change to Advanced view.
• Click on Mail and then on Archive.

  

• Under General, activate the archiving feature of your IceWarp Mail Server.
• Enter an Archive to Directory e.g. C:\Archive\ and optionally a Directory trailer path. IceWarp Mail Server creates a folder structure below the archive directory in the format Domain\Mailbox\Directory trailer path.
• Under Options enable Do not archive RSS and Do not archive spam if applicable.
• Click on Apply to save these settings.

Step 2: Setup of an IceWarp Mailbox to Access the IceWarp Archive

Once the archiving feature has been set up, an IceWarp user with access to the IceWarp archive has to be created. This user is later used by MailStore to retrieve the messages.

• Log on to IceWarp Server Administrator or IceWarp WebAdmim as administrator.
• Click on Domains & Accounts > Management.
• Click on the domain in which you would like to create the new user.
• Create the new IceWarp user.

  

• In the Options tab under Mailbox enter the full path of the archive directory specified in step 1 into the field Mailbox path.
• Click on Apply to finish.

Step 3: Configuration of MailStore Server

Setting up archiving processes for multidrop mailboxes is done using archiving profiles. General information about archiving profiles is available in chapter Working with Archiving Profiles.

Please proceed as follows:

• Log on as MailStore administrator using MailStore Client.
• In MailStore, click on Archive Email.
• To create a new archiving profile, select IceWarp Mail Server from the Email Server list in the Create Profile area of the application window.
• A wizard opens guiding you through the setup process.

  

• Select Multidrop Mailbox and click OK.

  Please note: To be able to archive a multidrop mailbox, MailStore Server users along with their email addresses must exist in the MailStore Server user management. If this is not the case, MailStore Server will offer to set up and run the IceWarp_catchall_02.png at this point. Once completed, the wizard will resume.
  Alternatively, you can cancel the wizard and create users manually as described the in chapter User Management.

• Fill out the fields Access via, Host, Username and Password. Click on Test to verify the data entered.
  
  

  For the TLS and SSL protocols only: If the certificate provided by the remote host cannot be verified (e.g. self-signed or signed by an unknown certificate authority), enable the option Accept all certificates to allow MailStore to establish a connection. As this option leads to an insecure configuration, warnings may appear in the summary and/or the dashboard.

  

• Adjust any further settings such as how to handle emails with unknown addresses or asking MailStore to delete emails after they have been archived. The latter option is especially sensible when dealing with mailboxes that are exclusively used for archiving.
• The placeholders {u-email} or {h-email} can be used under Target Folders. {u-email} represents a user's primary email address and {h-email} is the email address found in the email header. Should a user have multiple aliases, using {h-email} will result in emails sent to different aliases of a user being archived in different folders, while using {u-email} will file all emails below the primary email address.
  
  

  Notice: If you are additionally archiving messages from the users mailboxes, you have to set the target folder names here to the folder names that match the names that were created by the user mailbox archiving profiles. Otherwise, additional or similar folders could be created in the users' archives. The folder names are case-sensitive.

• If the option Synchronize with Directory Services before archiving is enabled, the MailStore user list will be synchronized with configured directory service before the archiving process actually runs. This has the advantage that, for example, new employees will be created as MailStore users before archiving which enables MailStore to sort their emails into the correct archives.
• Click on Next.
• The timeout value only has to be adjusted on a case-by-case basis (e.g. with very slow servers).
• Click on Next.
• At the last step, select a name for the new archiving profile. After clicking on Finish, the archiving profile will be listed under Saved Profiles and can be run immediately or automatically, if desired.

Weblinks

• MailStore Support
• IceWarp Homepage